PoE Switches

Versa Technology manufacturers some of the highest power budget Power over Ethernet switches on the market. Browse and purchase directly the devices you require, or reach out to us if you need some project guidance.

FAQ's on Versa's PoE Switches

Difference between PoE, PoE+, and PoE++?

PoE (power over Ethernet) is a reliable technology that delivers power and data over a single Ethernet cable for LANs. PoE comes in three strengths:

  • PoE: This technology was first defined in 2003 by the IEEE 802.3af standard. When functioning as a PSE, a PoE switch can support a maximum power consumption of up to 15.4W per PoE port and has a voltage range between 44V and 57V.
  • PoE+: This technology is an upgrade of the IEEE 802.3at standard and was published in 2009. PoE+ supports devices that have higher power consumption. A PoE+ switch delivers up to 25.5W for a PD with a voltage range from 50V to 57V.
  • PoE++: To provide even more power, PoE+ was upgraded to PoE++ (IEEE 802.3bt) in 2018. This technology has two classification types: Type 3 and Type 4. Type 3 uses two or all four twisted pairs in a copper cable. Type 4 delivers power over four twisted pairs in an Ethernet cable. A PoE++ switch delivers up to 60W on each port under Type 3 or up to 100W under Type 4.

What devices can use POE?

Low Watt PoE Devices

  • VoIP phones: These devices utilize the internet to provide telephone service instead of the standard pair of direct copper wires.
  • Internet Protocol (IP) cameras: These digital video cameras are similar to a webcam; they transmit and receive data over a network or the internet.
  • Wireless access point (WAP): This networking device creates a wireless local area network (WLAN) that allows Wi-Fi devices to connect to a wired network, enabling remote positioning.
  • Thin Clients: These devices are computers that have no localized hard drive. Instead, they work by being remotely connected to a centralized server.
  • Audio devices: Many amplifiers can use a PoE/PoE+ switch to generate the power needed to drive a speaker. A PoE-enabled speaker can cover greater areas and overcome higher ambient noise levels than standard speakers.
  • Remote computer terminals: PoE-enabled computers significantly reduce the need for electrical outlets because power is delivered over a single Ethernet cable.

High Watt PoE Devices

  • TVs: The latest PoE standard (IEEE 802.3bt-Type 4) can power some energy-efficient SMART TVs.
  • Computer monitors: An example of these devices is the panel PC, which is now becoming standard for checking-in to medical facilities, leisure facilities, activity centers, and AirBnB properties.

A sector to look at for the future is the recent PoE applications developing for SMART home automation. This cutting edge PoE technology includes LED lighting, heating and air conditioning, appliances, voice assistants, and even electric car charging stations.

What are the benefits of PoE switches?

While regular switches can be made PoE ready, as noted above, there are some distinct advantages to using a PoE switch. Here are a few:

  • Flexible: PDs that PoE powers can be located almost anywhere—even in hard-to-reach areas that are not close to an electrical outlet.
  • Sound Performance: PoE switches have state-of-the-art features such as high-performance hardware and software, auto-sensing to determine if a PD is PoE-enable or not, and network security.
  • Cost-Effective: With a PoE switch, there is no need to purchase extra electrical wiring or install additional outlets. Ethernet cables cost less and can be installed without the need for an expensive electrician.
  • Power Conservation: A PoE switch can determine the power supply needs of a PD and delivers only the amount required, eliminating power waste and saving money.
  • Future Proof: New PoE devices flood the market daily. The integration of PoE switches into your network infrastructure enables cutting-edge devices and will ultimately enhance your business posture.

What type of PoE switch should I buy?

There are three basic types of PoE switches: the unmanaged PoE switch, the smart (or hybrid) PoE switch, and the managed PoE switch. Deciding which of these is best suited for your specific needs and budget can feel overwhelming. Our goal is to simplify this process as much as possible by cutting through some of the complexity. Let’s begin.
The Unmanaged PoE Switch
Unmanaged PoE switches are basic, plug-and-play devices with no remote configuration, management, or monitoring options. These switches are recommended for home or small networks or can add temporary groups of systems to an extensive network. These switches have a built-in Quality of Service (QoS) service to ensure they work well. Unmanaged switches have basic security measures, such as a lockable port cover to ensure the device is not tampered with. However, an unmanaged PoE switch is never recommended for networks that handle sensitive information. As this is a basic, no-frills device, it is also the least expensive.
The Smart (Hybrid) PoE Switch
Smart PoE switches offer a “lite” version of network management, QoS, and security functions. Security levels include 502.1x endpoint authentication and, in some cases, a limited number of access control lists (ACLs). However, these switches cannot monitor or troubleshoot and cannot be accessed remotely. Smart switches are best suited for simple networks or at the edge of a large network where managed switches are the core infrastructure.
The Managed PoE Switch
A managed PoE switch provides the most comprehensive levels of management, configuration, and security available. These devices have features such as user traffic prioritization, network partitioning, the ability to connect to different types of networks, and traffic monitoring. Managed PoE switches provide QoS that is far beyond any offered by an unmanaged or smart PoE switch.

Security measures include:

  • Private virtual local area networks (VLANS)
  • Secure management (through SCP, Web-based Authentication, Radius/TACAS AAA, etc.)
  • Control Plane Policing (CoPP)
  • Rich support for 802.1x

The managed PoE switch is best used for business networks and data centers. We strongly recommend the purchase of a managed PoE switch whenever your budget allows.

Do I have to worry about PoE compatibility?

All PoE switches do not work with all PDs. You must ensure that you purchase a switch that will work with your devices. Here’s what to look for:

  • Be sure the PoE switch supports the same PoE standard required by your PDs. For example, if your PDs use the PoE+ standard, then your PoE switch must be PoE+, too.
  • Confirm that the power supply modes of the switch and the PD are the same. If a PD is designed for PoE mode A, but the PoE switch you are looking at is designed for mode B, they will not work together.
  • Make sure your PDs are not locked into working only with PSEs produced by a specific manufacturer.

Insights from the Blog

5 Things you need to know about PoE Switches
Featured Blog Outdoor PoE

PoE Calculator

This calculator allows you to determine the voltage that will be delivered to the remote PoE device.

Device Information:
Input Voltage:
(Volts)
Input Current:
(Amps)
Cable Information:
Wire Gauge:
(AWG #)
Power Pairs:
(pairs used for power)
Cable Length:
(Feet)
Results:
Voltage Drop:
(Volts)
Required Supply:
(Volts)
Effective Gauge:
(AWG #)
Cable Resistance:
(Ohms)
Power Dissipation:
(Watts per Foot)

Other PoE Resources

5 Reasons You Need an Industrial Ethernet Switch
Do I Need a Managed PoE Switch?
Custom PoE Solutions Banner link

We're Here to Help!

Not sure which PoE Device is right for you? Send us a short message here and a Versa technical partner will assist you shortly. Have an urgent need? Use the chat below during regular business hours.

Loading form.

Featured PoE Switch Video

Versatek's partnership with Aetek introduces the advanced and powerful H36 Industrial GbE Series Switches.

PoE AETEK Switches from Versa Technology
D40-082-30 Industrial PoE Switch
$275.00

D40-082-30 Unmanaged Industrial PoE Switch with 8 x 30W PoE + 2 SFP Interfaces

The D40-082-30 is a Gigabit PoE solution for Industrial environments and offers 8 10/100/1000BASE-T ports featuring 30-watt 802.3at.
  • Ports: 8*30W PoE, 2*SFP ports
  • Type of Switch: Unmanaged
  • Standards: 802.3at
  • PoE Power Budget: 240W
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
D60-044-91 Industrial Switch
$675.00

D60-044-91 Managed L2 Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces

The D60-044-91 is an L2 Managed Industrial Gigabit PoE switch that offers four 10/100/1000BASE-T ports featuring 90W 802.3bt PoE with 2 Gigabit copper ports and 2 SFP fiber slots.
  • Ports: 4*90W PoE, 2* GbE, 2*SFP ports
  • Type of Switch: Managed
  • Standards: 802.3bt
  • PoE Power Budget: 360W
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
D40-044-91-DC Industrial PoE Switch
$535.00

D40-044-91-DC Unmanaged Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces (12~56V DC)

The D40-044-91-DC is an IP30 Industrial Gigabit PoE switch that offers four 10/100/1000BASE-T ports featuring 90W 802.3bt PoE with 2 Gigabit copper ports and 2 SFP fiber slots with 12~56V DC input.
  • Ports: 4*90W PoE, 2* GbE, 2*SFP ports
  • Type of Switch: Unmanaged
  • Standards: 802.3bt
  • PoE Power Budget: 12VDC: 90W, 24VDC: 160W, 48VDC: 360W
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
D40-044-91 Industrial PoE Switch
$360.00

D40-044-91 Unmanaged Industrial PoE Switch With 4 X 90W 802.3bt PoE + 2 RJ45 And 2 SFP Interfaces

The D40-044-91 is an IP30 Industrial Gigabit PoE switch that offers four 10/100/1000BASE-T ports featuring 60W/90W bt PoE with 2 Gigabit copper ports and 2 SFP fiber slots for uplink.
  • Ports: 4*90W PoE, 2* GbE, 2*SFP ports
  • Type of Switch: Unmanaged
  • Standards: 802.3bt
  • PoE Power Budget: 360W
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
SD-202
$116.00

SD-202 Outdoor 10G Bt/UPoE/At/Af PoE Surge Protector

The SD-202 is a surge protector keeping PoE switches, PoE PDs, and any IP device safe from lightning & other forms of electrical interference such as power surges and spikes over networking cables.
  • Supports 10M/100M/1G/2.5G/10Gbps Ethernet
  • Supports 802.3af / 802.3at / 802.3bt / UPoE
  • Protects up to 20KV surge
  • TAA Compliant, made in Taiwan
SD-101
$69.00

SD-101 Indoor PoE Surge Protector

The SD-101 is a surge protector keeping PoE switches, PoE PDs, and any IP device safe from lightning & other forms of electrical interference such as power surges and spikes over networking cables.
  • Supports 10M/100M/1G/2.5G bps Ethernet
  • Supports 802.3af / 802.3at / 802.3bt / UPoE
  • Protects up to 20KV/10KA surge
  • TAA Compliant, made in Taiwan
SD-201
$102.00

SD-201 Outdoor bt/UPoE/at/af PoE Surge Protector

The SD-201 is a surge protector keeping PoE switches, PoE PDs, and any IP device safe from lightning & other forms of electrical interference such as power surges and spikes over networking cables.
  • Supports 10M/100M/1G/2.5G bps Ethernet
  • Supports 802.3af / 802.3at / 802.3bt / UPoE
  • Protects up to 20KV/10KA surge
  • TAA Compliant, made in Taiwan
SD-301
$72.00

SD-301 Indoor EPoC Surge Protector

The SD-301 is a surge protector keeping PoE switches, PoE PDs, and any IP device safe from lightning & other forms of electrical interference such as power surges and spikes over networking cables.
  • Supports EPoC Device
  • Protects Common Mode and Differential Mode
  • Protects up to 6KV surge
  • TAA Compliant, made in Taiwan
H40-044-30-150
$1,348.00

H80-044-60-250 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interface

The H80-044-60-250 Gigabit PoE Switch, a 4-Port 60W PoE + 2-port RJ45 + 2-port SFP L2 plus, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power.
  • Ports: 4*60W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Managed
  • PoE Ports: 4
  • Standards: 802.3at/af
  • PoE Power Budget: 250W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 40KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • Built-in Device Management System (DMS) software
  • TAA Compliant, made in Taiwan
H40-044-30-150
$1,180.00

H80-044-30-150 Managed Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces

The H80-044-30-150 Gigabit PoE Switch, a 4-Port 30W PoE + 2-port RJ45 + 2-port SFP L2 plus, is designed with IP67, 6KV PoE Ethernet surge protection, and 40KV surge protection in power.
  • Ports: 4*30W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Managed
  • PoE Ports: 4
  • Standards: 802.3at/af
  • PoE Power Budget: 150W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 40KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • Built-in Device Management System (DMS) software
  • TAA Compliant, made in Taiwan
H42-042-30-075
$413.00

H42-042-30-075 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 1 selectable 24/56VDC PoE and 1 SFP interface

The H42-042-30-075 is Industrial Gigabit Adjustable PoE Switch designed with IP67 & IK10, 6KV PoE Ethernet port surge protection, 10KV surge protection in AC power, and operation temperature between -40°C and 65°C during harsh weather conditions.
  • Ports: 4*30W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Unmanaged
  • PoE Ports: 4
  • Standards: 802.3at/af
  • PoE Power Budget: 75W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 10KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • TAA Compliant, made in Taiwan
H40-044-30-150
$825.00

H40-082-30-250 Unmanaged Industrial Outdoor PoE Switch with 8 x 30W PoE and 2 SFP interfaces

The H40-082-30-250 is a Gigabit PoE solution for the outdoor environment and offers eight of 10/100/1000BASE-T ports featuring 30-watt 802.3at.
  • Ports: 8*30W PoE, 2*SFP
  • Type of Switch: Unmanaged
  • PoE Ports: 8
  • Standards: 802.3at/af, UPoE
  • PoE Power Budget: 250W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 40KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • TAA Compliant, made in Taiwan
H40-044-30-150
$875.00

H40-044-60-250 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 60W PoE + 2 RJ45 and 2 SFP interfaces

The H40-044-60-250 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 60-watt UPoE.
  • Ports: 4*60W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Unmanaged
  • PoE Ports: 4
  • Standards: UPoH PoE
  • PoE Power Budget: 250W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 40KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • TAA Compliant, made in Taiwan
H40-044-30-150
$688.00

H40-044-30-150 Unmanaged Industrial Outdoor Gigabit PoE Switch with 4 x 30W PoE + 2 RJ45 and 2 SFP interfaces

The H40-044-30-150 is a Gigabit PoE solution for the outdoor environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at.
  • Ports: 4*30W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Unmanaged
  • PoE Ports: 4
  • Standards: IEEE 802.3af/at
  • PoE Power Budget: 150W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV PoE, 40KV AC
  • Operating Temp: -40 to 65°C
  • Power Supply Included
  • TAA Compliant, made in Taiwan
C50-162-30-250
$650.00

C50-162-30-250 Managed ONVIF GbE Switch with 16 X 30W PoE and 2 SFP Interfaces

The C50-162-30-250, a basic Layer 2 Smart PoE Switch, is equipped with 16-port Gigabit PoE (10M/100M/1G) and 2-port Gigabit (100M/1G) SFP transceiver slots for flexible link.
  • Ports: 16*30W PoE, 2*SFP
  • Type of Switch: Managed
  • PoE Ports: 16
  • Standards: 802.3at/af
  • PoE Power Budget: 270W
  • Input Voltage: 100~240VAC
  • Surge Protection: 6KV
  • Operating Temp: 0 to 50°C
  • Built-in Device Management System (DMS) software
  • TAA Compliant, made in Taiwan
H70-044-60
$996.00

H70-044-60 Managed Industrial IP30 PoE Switch With 4 X 60W PoE + 2 RJ45 And 2 SFP Interfaces

The H70-044-60 Industrial L2 plus Gigabit switch includes 4-Port 60W UPoE + 2-port RJ45 + 2-port SFP with 6KV Ethernet port surge protection.
  • Ports: 4*60W PoE, 2*SFP, 2*RJ45
  • Type of Switch: Managed
  • Standards: UPoE
  • PoE Power Budget: 240W
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • Built-in Device Management System (DMS) software
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
H36-044-90
$578.00

H36-044-90 Industrial Gigabit 30W/60W/95W PoE Switch W/ 12~56VDC Input

The H36-044-90 is an Industrial Gigabit PoE Switch that is designed with IP30, 12KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C during harsh weather conditions.
  • Ports: 4*95W PoE, 2*RJ45, 2*SFP
  • Type of Switch: Unmanaged
  • Standards: PoH PoE (60W/95W)
  • PoE Power Budget: 240W@48V
  • Surge Protection: 12KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
H36-042-30
$350.00

H36-042-30 Unmanaged Industrial PoE Switch with 4 X 30W PoE + 1 RJ45 and 1 SFP Interface

The H36-042-30 is an Industrial Gigabit Adjustable PoE Switch that is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C.
  • Ports: 4*30W PoE, 1*RJ45, 1*SFP
  • Type of Switch: Unmanaged
  • Standards: IEEE 802.3af/at
  • PoE Power Budget: 120W@48V
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
H36-042-30
$206.00

H32-042-30 IP30 Industrial Gigabit PoE Switch with 4 X 30W PoE + 1 Selectable 24/56VDC PoE and 1 SFP Interface

The H32-042-30 is an Industrial Grade Gigabit Selectable PoE Switch is designed with IP30, 6KV PoE Ethernet port surge protection, and operation temperature between -40°C and 75°C.
  • Ports: 4*30W GbE PoE, 1*GbE RJ45, 1*GbE SFP
  • Type of Switch: Unmanaged
  • Standards: IEEE 802.3af/at
  • PoE Power Budget: 120W
  • Input Voltage: 48~56VDC
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
H30-044-90
$385.00

H30-044-90 Unmanaged Industrial PoE Switch with 4 X 95W PoE + 2 RJ45 and 2 SFP Interfaces

The H30-044-90 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 60W/95W UPoE.
  • Ports: 4*60/95W PoE, 2*RJ45, 2*SFP
  • Type of Switch: Unmanaged
  • Standards: IEEE 802.3af/at
  • PoE Power Budget: 120W
  • Input Voltage: 48~56VDC
  • Surge Protection: 6KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply
H30-044-90
$220.00

H30-044-30 Unmanaged Industrial PoE Switch With 4 X 30W PoE + 2 RJ45 And 2 SFP Interfaces

The H30-044-30 is a Gigabit PoE solution for the Industrial environment and offers four of 10/100/1000BASE-T ports featuring 30-watt 802.3at.
  • Ports: 4*30W PoE, 2*RJ45, 2*SFP
  • Type of Switch: Unmanaged
  • Standards: IEEE 802.3af/at
  • PoE Power Budget: 120W
  • Input Voltage: 48~56VDC
  • Surge Protection: 12KV PoE
  • Operating Temp: -40°C ~ 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply
SD-424
$1,592.00

SD-424 24 Bay Modular PoE Surge Protector

The SD-424 24 bay PoE surge protector, keeps PoE switches, PoE PDs and any other IP devices safe from lightning and other forms of electrical interference.
  • 10M/100M/1G/2.5Gbps Ethernet
  • 802.3af / 802.3at / 802.3bt / UPoE
  • Protects 8 wires of networking cable including PoE
  • Protects up to 20KV/10KA surge
  • TAA Compliant, made in Taiwan
SD-404
$245.00

SD-404 DIN Rail Modular PoE Surge Protector

The SD-404 4 bay PoE surge protector, keeps PoE switches, PoE PDs and any other IP devices safe from lightning and other forms of electrical interference.
  • 10M/100M/1G/2.5Gbps Ethernet
  • 802.3af / 802.3at / 802.3bt / UPoE
  • Protects 8 wires of networking cable including PoE
  • Protects up to 20KV/10KA surge
  • TAA Compliant, made in Taiwan
VX-GPU2626 PoE Switch
$1,995.00

VX-GPU2626 (V2) L2+ 24-Port Managed GbE UPOE Switch (2000W)

The VX-GPU2626 (V2), from Versa Technology, delivers 24 10/10/100TX UPOE ports (802.3bt/at/af, and total of 2000W), 2 Combo 100/1000X SFP TX ports and RJ45 Console port.

  • Ports: 24 10/100/1000TX PoE + 2 100/1000 SFP/TX
  • Type of Switch: Managed
  • PoE Ports: 24
  • Standards: Ultra PoE 802.3bt Ready, 802.3at
  • PoE Power Budget: 2000W
  • Operating Temp: 0 to 40°C
  • Input Voltage: 115-240VAC
  • Forwarding Capacity: 36.68Mpps
  • Includes: 2 x 1000W Power Supply
VX-GPU2610-9 UL PoE Switch
$750.00

VX-GPU2610-9 L2+ 8-Port 10/100/1000TX 90W 802.3bt PoE + 2-Port 100/1000X SFP Managed Switch (740W PoE budget, DMS)

The VX-GPU2610-9 delivers 8 UPOE ports (802.3bt/at/af, and total of 740W), 8 10/10/100TX ports, 2 Combo 100/1000X SFP TX ports and RJ45 Console port.

  • Ports: 8 802.3bt PoE + 8 10/100/1000TX + 2 100/1000TX SFP
  • Type of Switch: Managed
  • PoE Ports: 8
  • Standards: Ultra PoE 802.3bt Ready, 802.3at/af
  • PoE Power Budget: 740W (90W per port)
  • Input Voltage: 100~240VAC
  • Forwarding Capacity: 14.88Mpps
  • Operating Temp: 0 to 40°C
  • UL Listed
VX-GPU2610 PoE Switch
$489.00

VX-GPU2610 L2+ 4-Port 802.3bt PoE + 4-Port 10/100/1000TX + 2-Port 100/1000X SFP Managed GbE UPOE Switch (240W, DMS)

The VX-GPU2610, from Versa Technology, delivers 4 UPOE ports (802.3bt/at/af, and total of 240W), 4 10/10/100TX ports, 2 Combo 100/1000X SFP TX ports and RJ45 Console port.

  • Ports: 4 802.3bt PoE + 4 10/100/1000TX + 2 100/1000TX SFP
  • Type of Switch: Managed
  • PoE Ports: 4
  • Standards: Ultra PoE 802.3bt Ready, 802.3at/af
  • PoE Power Budget: 240W (60W per port)
  • Input Voltage: 100~240VAC
  • Forwarding Capacity: 14.88Mpps
  • Operating Temp: 0 to 40°C
  • Supports: LLDP
VX-IGPU-2708A Industrial PoE Switch
Contact us for more info.

VX-IGPU-2708A Industrial L2+ Managed GbE UPOE Switch with 6-Port 10/100/1000TX Shared 4 UPoE + 2 100/1000 SFP

Versa Technology’s VX-IGPU-2708A features 6 (10M/100M/1G) RJ45 ports with 4 UPoE ports (supports 802.3 at/af/UPoE and total of up to 240W), 2 GbE SFP ports and 1 RJ45 console port.
  • Ports: 6 10/100/1000TX Shared 4 UPoE + 2 100/1000 SFP + 1 console port
  • Type of Switch: Managed
  • PoE Ports: 4
  • Standards: 802.3bt Ready Ultra PoE, 802.3af/at
  • PoE Power Budget: 240W Max.
  • Voltage: 48-57V DC
  • Operating Temp: -40 to 75°C
Note: ALL Industrial Switches do NOT include a power supply. Click here to shop all Industrial Power Supply.

FREE SHIPPING

For continental US orders

RELIABLE EQUIPMENT

Top-of-the-line Devices

PREMIUM TECH SUPPORT

Dedicated US in-house support

SAFE PAYMENT

100% secure processor

Stay Up to Date with our News
and Exclusive Offers

Join our expansive group of IT professionals who receive exclusive offers and the latest developments in the Telecom and Networking Industry.