PoE Injectors

Provide and manage power easier than ever with the Power over Ethernet Injectors from Versa Technology. These high quality devices work efficiently and do not require additional cabling, which cuts down installation time.

FAQ's on PoE Injectors

What kind of cable do I need?

PoE injectors are based on the IEEE 802.3 standards. Cat 5 or higher Ethernet cables are available and will work with PoE injectors. Please note that with PoE injectors using PoE++ or Hi-PoE standards, Cat 6a cables are recommended.

Does a PoE injector have manageable ports?

No. If you need a management feature, you should choose a PoE switch.

Will a PoE injector damage my equipment?

IEEE 802.3af/at/bt-compliant PoE injectors are safe and will not harm any equipment, even if it is not designed for PoE applications. This is because the PoE injector has a built-in handshake procedure. Before it sends any power to the connected PD, if the handshake is not successfully completed for any reason, the PoE injector will not send any power. Therefore, all IEEE 802.3-compliant devices are inherently safe.

Can I use a PoE injector to power a Gigabit switch?

A PoE injector cannot be used to power a Gigabit switch unless the switch has a port to allow for PoE power.

How do PoE injectors save money?

There are four significant ways that the purchase and deployment of a PoE injector will save you money:

  1. The biggest money saver is that IT pros can combine legacy devices with newer PoE technology through a PoE injector.
  2. PoE injectors enable organizations to add remote devices to their network without having to install electrical outlets.
  3. PoE injectors are easy to install and will not require the expense of an electrician.
  4. PoE injectors themselves are inexpensive, especially when compared to the cost of a PoE switch.

Insights from the Blog

What is a PoE Injector Blog Banner
Featured Blog Outdoor PoE

PoE Calculator

This calculator allows you to determine the voltage that will be delivered to the remote PoE device.

Device Information:
Input Voltage:
(Volts)
Input Current:
(Amps)
Cable Information:
Wire Gauge:
(AWG #)
Power Pairs:
(pairs used for power)
Cable Length:
(Feet)
Results:
Voltage Drop:
(Volts)
Required Supply:
(Volts)
Effective Gauge:
(AWG #)
Cable Resistance:
(Ohms)
Power Dissipation:
(Watts per Foot)

Other PoE Resources

5 Reasons You Need an Industrial Ethernet Switch
Custom PoE Solutions Banner link

We're Here to Help!

Not sure which PoE Device is right for you? Send us a short message here and a Versa technical partner will assist you shortly. Have an urgent need? Use the chat below during regular business hours.

Loading form.

Featured PoE Injector Video

Introduction to our 90W PoE Injector, the VX-1000GPP with a Power Output of 90 Watts, at 802.3at, LTPoE++ 90W standards and an Operating Temp range of -40 to 75°C.

90W PoE Injector VX-1000GPP by Versa Technology
I36-100
$138.00

I36-200 Ultra PoE 60W Injector

The I36-200 is a indoor/outdoor 60W PoH PoE middle-span PoE injector.
  • Interface: 1 x 10/100/1000Mbps
  • Power Input: 100~240VAC
  • Power Output: 60 Watts
  • Standard: IEEE 802.3at
  • Operating Temp: -10 to 50°C
  • TAA Compliant, made in Taiwan
I69-206 PoE Injector
$250.00

I69-216 Industrial Gigabit 90W 802.3bt PoE Injector

The I69-216 is an Industrial Gigabit 90W 802.3bt PoE injector that powers a variety of PDs and passes data over network cables remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Power Input: 12~56VDC
  • Power Output: 90 Watts
  • Standard: IEEE 802.3bt
  • Operating Temp: -40 to 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.  
I69-206 PoE Injector
$275.00

I69-206 Industrial Gigabit 95W PoH PoE Injector (12~56V DC)

The I69-206 is an Industrial Gigabit 95W PoE injector that powers a variety of PDs and passes data over network cables remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Power Input: 12~56VDC
  • Power Output: 95 Watts
  • Standard: IEEE 802.3bt
  • Operating Temp: -40 to 75°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply. 
I49-Series PoE Injector
$358.00

I49-200 Outdoor Gigabit 95W PoE Injector

The I49-200 is an outdoor 95W PoH PoE injector that powers a variety of PDs and passes data over network cables remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Enclosure: IP67/ IK10 cast aluminum
  • Power Input: 100~240 VAC
  • Power Output: 54VDC, 95 Watts
  • Standard: IEEE 802.3bt
  • Operating Temp: -40 to 65°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply. 
I49-Series PoE Injector
$330.00

I46-200 Outdoor Ultra PoE 60W Injector

The I46-200 is an outdoor PoH PoE 60W injector that powers a variety of PDs over single network cable remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Enclosure: IP67/ IK10 cast aluminum
  • Power Input: 100~240 VAC
  • Power Output: 54VDC, 60 Watts
  • Standard: IEEE 802.3at
  • Operating Temp: -40 to 65°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply. 
I39-200 PoE Injector
$165.00

I39-200 Gigabit PoE 95W Injector

The I39-200 is an indoor 95W PoH PoE injector that powers a variety of PDs and pass data over network cables remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Power Input: 100~240VAC
  • Power Output: 54VDC, 95 Watts
  • Standard: IEEE 802.3at
  • Operating Temp: -10 to 50°C
  • TAA Compliant, made in Taiwan
I39-100
$137.50

I39-100 Ultra PoE 95W Injector

The I39-100 is a UPoE 95W injector that powers variety of PDs and pass data over network cables remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Power Input: 100~240VAC
  • Power Output: 54VDC, 95 Watts
  • Standard: IEEE 802.3bt
  • Operating Temp: 20 to 30°C @ 95W
  • TAA Compliant, made in Taiwan
I49-Series PoE Injector
$275.00

I49-100 Outdoor Ultra PoE 95W Injector

The I49-100 is an outdoor UPoE injector that powers a variety of PDs over single network cable remotely.
  • Interface: 1 x 10/100/1000Mbps
  • Enclosure: IP67/ IK10 cast aluminum
  • Power Input: 100~240 VAC
  • Power Output: 54VDC, 95 Watts
  • Standard: IEEE 802.3bt
  • Operating Temp: -40 to 60°C
  • TAA Compliant, made in Taiwan
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply. 
202MP Front
$250.00

VX-202MP Lite Managed Industrial Fiber to 2 GbE IEEE 802.3bt (Type 4) PoE Injector

The VX-202MP is a Managed Industrial Fiber-to-Ethernet PoE Injector with 2-port 10/100/1000 Base-TX IEEE 802.3bt PoE (Type 4) to transmit power and data between 1000 Base-FX Fiber and 10/100/1000BASE-T(X) Ethernet interface.
  • Interface: 2 x RJ-45 (Data-In, Data+PoE Out), 1 x SFP
  • Ethernet Data Rate: 10/100/1000Mbps
  • Power Input: 48~56VDC (Terminal Block)
  • Power Output: 90 Watts
  • Standard: IEEE 802.3bt (Type 4)
  • Operating Temp: -40 to 75°C
Note: ALL Industrial units do NOT include a power supply. Click here to shop the Industrial Power Supply.
vx-pi148-side-white
$12.00

VX-Pi148G Gigabit Power Over Ethernet Passive Injector

The VX-Pi148G from Versa Technology is a dependable Power Over Ethernet Passive Injector that is IEEE 802.3af compatible and supplies 48VDC of Power over Ethernet cables.
  • Interface: 2 x RJ-45 (Data-In, Data+PoE Out)
  • DC Output Voltage: Passive (Dependent on DC In)
  • Standard: 802.3af compatible
  • Operating Temp: -10 to 50°C
  • Power Input: 5VDC - 56VDC
  • Ethernet Data Rate: 10/100/1000Mbps
  • End-Span / Mid-Span: Mid-Span
vx-pi148-side-white
$12.00

VX-Pi148 Power Over Ethernet PoE Passive Injector Adapter

The VX-Pi148 is a 802.3af compatible 10/100M Power Over Ethernet PoE Passive Injector Adapter from Versa Technology.
  • Interface: 2 x RJ-45 (Data-In, Data+PoE Out)
  • DC Output Voltage: Passive (Dependent on DC In)
  • Standard: 802.3af compatible
  • Operating Temp: -10 to 50°C
  • Power Input: 5VDC- 56VDC
  • Ethernet Data Rate: 10/100Mbps
  • End-Span/ Mid-Span: End-Span
VX-Pi100 PoE Injector
$21.00

VX-Pi100 PoE Injector

VX-Pi100 802.3af Compatible PoE Injector supplies Power over Ethernet to LAN devices such as Access Points, VoIP Phones, IP Cameras and HDMI Extenders. * Best Selling Unit!
  • Interface: 2 x RJ-45 (Data-In, Data+PoE Out)
  • DC Output Voltage: 48VDC
  • Standard: 802.3af compatible
  • Operating Temp: -10 to 50°C
  • Power Input: 110/220VAC
  • Ethernet Data Rate: 10/100Mbps
  • End-Span / Mid-Span: Mid-Span
  • UL and C-Tick Certified

FREE SHIPPING

For continental US orders

RELIABLE EQUIPMENT

Top-of-the-line Devices

PREMIUM TECH SUPPORT

Dedicated US in-house support

SAFE PAYMENT

100% secure processor

Stay Up to Date with our News
and Exclusive Offers

Join our expansive group of IT professionals who receive exclusive offers and the latest developments in the Telecom and Networking Industry.