Versa Store: VX-IFT802

English

Español

Sitemap

View Cart

Home > Versa Store > Industrial Ethernet > VX-IFT802

Ethernet to Coax Modems

Tel: 800-989-2797

Fax: 800-989-2797

Email: info@versatek.com

Free quote & solutions draft.

		Product Images		Data Sheet (PDF)		Tech Support
		Product Specifications		Manual		Download

PLANET VX-IFT802 industrial 10/100Base-TX to 100Base-FX Media Converter Product Description:

Related Products

VX-200E
Unmanaged 10/100 Single Port Media Converter

VX-200F
Unmanaged 100 Single Port Media Converter

VX-IFT802 is a cost-effective solution for the converting 10/100Base-TX (Auto MDI/MDIX) to 100Base-FX cabling. It provides two power inputs that can be connected simultaneously to the DC power sources. That is, if one power input fails, the other one acts as a backup.

VX-IFT802 Key Features:

Hardware Features:
	UTP to Fiber Media Converter
	Auto Negotiation Speed and Half/Full Duplex
	Supports12 to 48V DC power inputs
	TX port support Auto MDI/MDI-X
	Relay alarm output for port link failure
	IEEE 802.3x flow control support
	Flow control on full-duplex
	Back pressure on half-duplex
	Built-in Link Lose Forwarding Technology
	DIN-Rail or wall mountable
	DIP-switches to set the operation mode and Link- Lost-Forwarding function
Industrial Conformance:
	12 to 48V DC, redundant power with polarity reverse protect function and connective
	removable terminal block for master and slave power
	0 to 60 Degree C operation temperature
	IP-30 Aluminum case
	EMI complies with FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN6100-4-4, CE EN6100-4-5 and CE EN6100-4-6
	Stability testing with IEC60068-2-32(Free fall), IEC60068-2-27(Shock) and IEC60068-2-6(Vibration)

VX-ift820 Industrial Media converter Specifications:

Standard:	IEEE 802.3 10BASE-T
	IEEE 802.3u 100BASE-TX/100Base-FX
	IEEE 802.3x Flow Control and Back pressure
10/100 Mbps TP:	CAT-3/5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support
Fiber Connector:	SC Multi-Mode model
Switching Architecture:	Store and forward
Fiber Parameters:	Fiber Core: Multi-Mode (62.5/125um, 50/125um)
	Wavelength: 1310nm
	Fiber Distance: Multi-Mode Fiber 2Km (Available on Multi mode model)
Link Lost Forward:	TX to Fiber: If TX port link down, the media converter will force Fiber port to link down
	Fiber to TX: If Fiber port link down, the media converter will force TX port to link down.
DIP Switch:	DIP Switch 1:	ON: Enables Port Alarm
		OFF: Disables Port Alarm
	DIP Switch 2:	ON: Enables LLF (Link Lose Forwarding)
		OFF: Disables LLF (Link Lose Forwarding)
	DIP Switch 3:	ON: 100Base-FX Half-mode
		OFF: 100Base-FX Full-mode
	IP Switch 4:	ON: 100Base-TX Full-duplex mode
		OFF: Auto-Negotiation
LED:	Power (Green), Power1 (Green), Power2 (Green), Fault (Orange)
	Fiber: Link / Activity (Green)
	Half / Full Duplex (Orange)
	TX: 10/100(Green)
	Link (Green)
	Half / Full Duplex (Orange)
Power Supply:	12 to 48 V DC, redundant power with polarity reverse and overlap current protection function
Power Consumption:	4.6 Watts
Installation:	Provide DIN rail kit and wall mount ear for 3-way installation
Operating environment:	0 to 60 Degree C, 5%~90%RH (Non-condensing)
Storage environment:	-40 to 85 Degree C, 5%~90%RH (Non-condensing)
Dimension (W x D x H):	54 x 105 x 155 mm
Emission:	FCC Class A, CE mark
Stability testing:	IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration)